How to reduce the loss of laser cutting machine
The price of laser cutting machine is not low, ranging from hundreds of thousands to millions. Therefore, as long as possible to extend the service life of the laser cutting machine to better save production costs, it can be seen that the daily maintenance and maintenance of the laser cutting machine is very important. So in what ways can the laser cutting machine reduce the loss?
First of all, when we need to use the cutting machine for work, we must first push the beam before turning on the machine, try to move it back and forth, and there is no abnormal noise when moving left and right before powering on. After finishing the work of the day, clean up the materials produced on the day in the machine and the waste residues generated. This can protect the motion system of the machine and prevent it from being damaged by foreign objects. Clean up its moving parts to keep the machine in good working condition. The specific methods are as follows:
How to reduce loss of laser cutting machine
- Put a little lubricating oil on the screws, including the screws on the laser tube support and the first reflector, which can facilitate the disassembly and assembly during maintenance. Note: Do not add lubricating oil to timing belts, drag chains, air pipes, motors, sensors, lenses, and wires.
- No items can be placed in the machine to avoid unnecessary damage to the machine.
- Clean with cotton cloth: dust and foreign matter on the metal oil tanker, metal shaft, sliding block and linear guide, and then add lubricating oil, and carry out the reciprocating motion of the empty line.
How to reduce loss of laser cutting machine
- Replacement of circulating water and cleaning of water tank: Make sure that the laser tube is filled with circulating water before the machine works. The water quality and temperature of the circulating water directly affect the service life of the laser tube. Therefore, it is necessary to regularly replace the circulating water and clean the water tank. It is best to do it once a week.
- Fan cleaning: long-term use of the fan in the machine will cause a lot of solid dust to accumulate in the fan, causing the fan to generate a lot of noise, and it is also not conducive to exhaust and deodorization. When the fan suction is insufficient and the smoke is not smooth, the fan must be cleaned.
- Cleaning of the lens: There will be some mirrors and focusing mirrors on the machine. The laser light is emitted from the laser head after being reflected and focused by these lenses. The lens is easily stained with dust or other contaminants, which can cause laser loss or damage to the lens. So clean the lenses every day. At the same time of cleaning, pay attention to:The lens should be wiped gently, and the surface coating should not be damaged;The wiping process should be handled gently to prevent falling;When installing the focusing lens, be sure to keep the concave surface down.
How to reduce loss of laser cutting machine
Although the laser cutting machine has a wide range of use, its main direction is metal cutting, and it can perform cutting work quickly. Therefore, the cutting pattern is very accurate, which not only improves the artistic taste and technical content of sheet metal processing, but also increases the profit margin. Therefore, workers must carry out some training before operation
